- List Item #1
- List Item #2
- List Item #3
Menu
Home » Jungheinrich Forklifts » ETR 230
The ETR pantograph reach truck forklift series runs two shifts on one battery charge, guaranteed, allowing your operators to maximize their workday.
Jungheinrich® is now offering a game-changing guarantee on the 3,000 – 4,500 lb. 36 volt pantograph reach truck forklifts. These lift trucks are guaranteed to run two full shifts without stopping to charge the battery – for five years. If your forklift doesn’t perform to this standard, we’ll cover the cost of a new battery to ensure it does.
Powerful Jungheinrich® 3-phase AC technology is proven to provide rapid acceleration, precise speed control, smooth directional changes and energy reclamation during braking.
One of the fastest in the industry, the reach truck’s hydraulic system reaches a lifting speed of up to 160 feet per minute with fork heights reaching up to 450 inches.
Dual floorboard pedal system helps to reduce risk by requiring the operator to be in the normal operating position to activate drive or hydraulic functions.
When forks are raised above the mast freelift stage, travel speed slows.
Due to the advanced AC electric control system, energy management is maximized.
The ETR reach truck series is built for efficiency and is guaranteed to run two shifts on one battery charge – allowing your operators to get the most out of their workday.
The spacious operator compartment combines comfort and functionality to improve operator efficiency.
Intuitive multifunction control handle offers simultaneous control of the drive, lift, lower and auxiliary hydraulic functions.
Location of forklift operator controls allows for flexible side stance position within the reach truck compartment.
Anti-fatigue floor mat and generous padding for knees, hips, back and armrest.
Low-effort electric power steering for precise control with minimal effort.
Experierience low energy consumption, longer run times and powerful acceleration with advanced AC technology.
Ensure reliable forklift operation over the long-term with sealed components protected to IP54 standards, helping to safeguard against dust and moisture.
AC motors are designed for longevity, featuring no carbon brushes to eliminate the cost of replacement parts and related service.
Durable design, with heavy-duty mast and rollers, is designed to meet the needs of your tough applications, protecting your investment.
“The (Jungheinrich) equipment that we have is top of the line and really stands out compared to what we used to have.” – Brent Cable, Industrial Engineer
| Model | Basic Capacity (lbs) | Maximum Fork Height2 | Voltage (or Fuel Type) | Length to Fork Face | Chassis Width (in) | Chassis Height (in)1 | Gross Weight (lbs)1 |
|---|---|---|---|---|---|---|---|
|
ETR 230 |
3,000 |
242 |
36 |
52 |
41.5 |
95 |
6,850 |
|
ETR 235 |
3,500 |
242 |
36 |
55 |
41.5 |
95 |
6,850 |
|
ETR 340 |
4,000 |
242 |
36 |
55 |
41.5 |
95 |
7,050 |
|
ETR 345 |
4,500 |
242 |
36 |
55 |
41.5 |
95 |
7,050 |
|
ETR 335d |
3,500 |
242 |
36 |
62.3 |
41.5 |
95 |
7,400 |
¹ Where applicable, does not reflect optional mast collapsed height or additional weight.
² Various lift heights available to match your exact needs. Where applicable, value shown is maximum fork height available as an optional mast.
Talk to a Jungheinrich specialist who can help find the best solution for your needs and budget.
